How do I physically install a NoahFace Thermal unit?

Installing NoahFace Thermal

Physical mounting instructions are provided in the packaging. The most important points to note are:

In addition to the physical mount, you will need a generation 8 iPad (or later)
The camera eye of the iPad should be mounted at approximately 148cm (58”) from the ground if it is mounted vertically on a well. A lower mounting position of 120+cm (47”) is possible if it is mounted at an angle, facing slightly upwards.
The camera eye of the iPad cannot be facing a window or other strong back-light.
You will need two POE connectors to provide power and network connectivity to the iPad and the internal temperature sensor.