When setting up Noahface Visitor Registration, how do I add an Access Point?

Visitor Registration Access Point

Adding an Access Point Type

Select the Access Points menu and then the Access Point Types tab, and then press the + Add access point type button. Set the following options:

• Name. Set this to “Visitor Registration”
• Platform. Set to “Kiosk”
• Screen type. Set this to "Visitor Registration”
• Screen details. You can further configure visitor registration by specifying options within this field. The options available are explained in this Setup Guide. Also see: https://www.noahface.com/mobile-screen-configuration
• Screen timeout. This controls the timeout after which the NoahFace App will automatically return to the home screen. The default time of 20 seconds is generally sufficient, but you can adjust it as desired
• Sensor. If you are planning to screen visitors for elevated temperatures, you should select “Temperature Sensor” and set your thresholds and messages as appropriate

Adding an Access Point

Select the Access Points menu and then the Access Points tab, and then press the + Add access point button to add an access point. You should select your site and access point type as appropriate. If you are planning to screen visitors for elevated temperatures, you should also enter the identifier of your temperature sensor. 

Once you have added your access point, you can enter your activation code into the NoahFace App to connect it.